Starters and Ignition Repair | Makefield Auto Repair

MAKEFIELD AUTO REPAIR > The Best Auto Repair And Maintenance Services > IGNITION REPAIR

Starters and Ignition Repair For High-Performance Cars and Trucks

At Makefield Auto Repair in Morrisville our expert mechanics can handle the precision auto repairs high-performance drivers expect. Drivers in Morrisville count on Makefield Auto Repair to accurately reprogram automobile computers, outfit new cars and trucks with competition-grade ignition systems and upgrade starters for older muscle cars. Call today at 215-295-8848 to set up an appointment.

Starters and Ignition Repair in Morrisville
If your high-performance engine has a starter that struggles to turn over, it may be due to the intense engine compression ratio. Standard OEM starters might not meet the demands of high-performance vehicles, which require more cranking power. Consider upgrading to a high torque starter and ignition system for that extra boost. These starters are smaller and lighter, offering better clearance and reliability whether on the track or in your driveway. Let Makefield Auto Repair enhance your vehicle's start-up with a high-amp battery and a high-torque mini starter.

Restoring an older muscle car? At Makefield Auto Repair, we can upgrade your vehicle's power system with modern digital ignition controls, performance distributors, and low-resistance ignition wires. Depend on our mechanics to refresh your car's starter and ignition system with a new wiring harness, distributor cap, rotor, and spark plugs. Visit our shop in Morrisville to discuss how we can assist in your muscle car restoration.

Ignition Repair FAQs

What are the common signs that my ignition needs repair?

Customers often inquire about what symptoms indicate a problem with the ignition system. Common signs include the car failing to start, the key not turning in the ignition, unexpected stalling of the vehicle, and the engine not cranking despite turning the key. These symptoms suggest issues with the ignition switch, the starter motor, or other related components.

How much does it typically cost to repair an ignition system?

The cost of ignition repair can vary widely depending on the specific issue and the vehicle make and model. Generally, costs can range from a simple repair of a few hundred dollars to more extensive replacements that could exceed a thousand dollars. Customers are advised to get a detailed diagnostic to understand the precise problem and associated costs.

How long does an ignition repair take?

The duration of an ignition repair can depend on the complexity of the issue and the availability of any necessary parts. Typically, simple repairs might take a few hours, while more complex issues that require part replacements can take a full day or longer. It's best for customers to consult with their service provider for a more accurate time estimate based on their vehicle's condition.

To learn more about our ignition repair services, call us at 215-295-8848 or request a quote by clicking below:

Request Quote

Discover More About Ignition Repair Services At Makefield Auto Repair in Morrisville

Miscellaneous Auto Services

hours

Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
Sunday

8:00AM - 5:30PM
8:00AM - 5:30PM
8:00AM - 5:30PM
8:00AM - 5:30PM
8:00AM - 5:30PM
Appointment Only
Closed
Contact us

Makefield Auto Repair

87 Makefield Rd
Morrisville, PA 19067
215-295-8848
Email Us | Get Directions
fax: 215-295-8840
email: makefieldauto@aol.com
Vehicle tips
- According to recent studies, 5 percent of all motor vehicle fatalities are clearly caused by automobile maintenance neglect.
- The cooling system should be completely flushed and refilled about every 24 months. The level, condition, and concentration of coolant should be checked. (A 50/50 mix of anti-freeze and water is usually recommended.)
- Never remove the radiator cap until the engine has thoroughly cooled. The tightness and condition of drive belts, clamps and hoses should be checked by a pro.
- Change your oil and oil filter as specified in your manual, or more often (every 3,000 miles) if you make frequent short jaunts, extended trips with lots of luggage or tow a trailer.
- Replace other filters (air, fuel, PCV, etc.) as recommended, or more often in dusty conditions. Get engine drivability problems (hard stops, rough idling, stalling, diminished power, etc.) corrected at a good shop.
- A dirty windshield causes eye fatigue and can pose a safety hazard. Replace worn blades and get plenty of windshield washer solvent.
- Have your tires rotated about every 5,000 miles. Check tire pressures once a month; let the tires cool down first. Don't forget your spare and be sure your jack is in good condition.
- Check your owner's manual to find out what fuel octane rating your car's engine needs then buy it.
- Keep your tires inflated to the proper levels. Under-inflated tires make it harder for your car to move down the road, which means your engine uses more fuel to maintain speed.
- Lighten the load. Heavier vehicles use more fuel, so clean out unnecessary weight in the passenger compartment or trunk before you hit the road.
- Use the A/C sparingly. The air conditioner puts extra load on the engine forcing more fuel to be used.
- Keep your windows closed. Wide-open windows, especially at highway speeds, increase aerodynamic drag and the result is up to a 10% decrease in fuel economy.
- Avoid long idling. If you anticipate being stopped for more than one minute, shut off the car. Contrary to popular belief, restarting the car uses less fuel than letting it idle.
- Stay within posted speed limits. The faster you drive, the more fuel you use. For example, driving at 65 miles per hour (mph) rather than 55 mph, increases fuel consumption by 20 percent.
- Use cruise control. Using cruise control on highway trips can help you maintain a constant speed and, in most cases, reduce your fuel consumption.
- Keep your engine tuned. A fouled spark plug or plugged/restricted fuel injector can reduce fuel efficiency as much as 30 percent.
- Inspect the engine's belts regularly. Look for cracks or missing sections or segments. Worn belts will affect the engine performance.
- Have the fuel filter changed every 10,000 miles to prevent rust, dirt and other impurities from entering the fuel system.
- Change the transmission fluid and filter every 15,000 to 18,000 miles. This will protect the precision-crafted components of the transmission/transaxle.
- Inspect the suspension system regularly. This will extend the life of the vehicle's tires.
Prev Slide Next Slide